Buckler for Battle of the Nations
34cm / 13.5" Buckler for the Battle of the Nations:
Made from 1050 Heat Treated Spring Steel
(Quenched at 1500F, Tempered at 600F for 30 minutes).
Finished 10/30/2012 (0.050"/18ga. 1050 spring steel, Burnt linseed oil finish)
Finished 11/2012 (0.035"/20ga. 1050 spring steel, Burnt linseed oil finish)
Latest Patterns as of Feb. 26, 2013
CAD DXF file of the patterns for the plates. You can use this file to machine cut the metal plates.
[Back to Main Armour Page]
Copyright 2013 Craig W. Nadler All rights reserved